Suzuki Swift Sport 1.4 Turbo ZC33S LHD Forge Motorsport Performance Induction Kit
Brand New Genuine Forge Motorsport Performance Parts & Accessories
This intake is designed for LHD vehicles and will NOT fit the RHD version. For the RHD, see our shop
After the success of our Intake system for the RHD Suzuki swift Sport (ZC33S), due to popular demand we wanted to give LHD swift owners an equivalent aftermarket intake filtration system. Several months of testing have been spent developing a kit with all the same qualities of our FMINDK29 kit which are:
- Increase power and torque output
- Improve the sound characteristics of the engine note
- Improve the visual impact of the engine bay
During Forge’s testing, they found that the location of the original airbox was susceptible to a vast amount of heat soak. This is because the airbox air feed is placed directly above a very hot source of heat – the radiator. This led Forge to design and relocate where the air filter/airbox is housed in the engine bay. The Forge cold air intake system now cleverly draws air from within the Suzuki Swifts front bumper keeping the intake temperatures extra cool in any climate. After extensive testing, Forge found that their carbon fibre canister filters worked the best. The filter element itself is provided by Pipercross and is fully serviceable or replaceable if necessary. The pipework of the kit runs around the cold side of the engine and away from the engines turbo manifold; this again is to keep intake temperatures down as low as possible. In total, Forge observed intake temperatures fall from 39°C down to 26°C. These numbers will come down further still with the addition of Forge’s intercooler upgrade.
The Forge High Flow airbox produced an impressive increase of over 8BHP at 5500RPM and a gain of torque throughout the entire rev range on independent dyno testing.
The design of this kit has also introduced some excitement to the driving experience with a subtle yet characterful induction roar when on harder acceleration.
You will be very happy with the visual impact of the kit upon opening the bonnet. Every part of the kit from the handmade aluminium hard pipe to the bespoke silicone hose and the carbon fibre filter both looks and feel the high quality – quite simply because they are!
The kit comes complete with everything you need for installation, which can be carried out in around 40 minutes, including a set of full-colour instructions.
Hoses are available in Red, Blue or Black. Pipes are available in an Alloy or Black finish. Please state at checkout which colours you require. If no colour is specified then Black will be sent.
If you require the gold tape for heat management it is available to purchase separately in our shop
We recommend all parts are fitted by a qualified mechanic to ensure the correct fitment, though this kit does include fitting instructions
See our shop for other Forge products plus 1000s more Performance Parts