Description

Saab 9-3 1.8t 2.0t 2.8t Non Aero Jetex Performance Stainless Steel Cat Back Exhaust System with Dual Oval Tail Pipes

Genuine Brand New 100% Genuine Jetex System

• Performance Stainless Steel Exhaust
• Polished 301 Stainless Steel Duplex Oval 85/150mm
• System Pipe Diameter: 2.5 inch

About Jetex Performance Exhausts

Jetex Performance Exhausts, Since 1986.  With 30 years of exhaust design and development experience, Jetex has gained a reputation for producing exhausts that are well-engineered, perform consistently and create a perfect harmony between car and exhaust.

Absorption Designed

Sound reduction is a critical design concern with any exhaust system. Standard exhausts use a baffle design where a series of plates slow the exhaust gases, but ultimately this leads to an increase in backpressure. Jetex silencers have no baffles. Instead, noise is reduced by absorption through a centre perforated tube. Consequently, there is less gas flow restriction and so back pressure is reduced, torque is increased and engine performance is enhanced.

Mandrel Bends

It is essential that gas flow from the engine is unrestricted and flows smoothly along the whole length of the exhaust system. All Jetex bends (where possible) are mandrel bent rather than cut and welded. This ensures that the gas exits as quickly as possible, ensuring back pressure reduction and enhanced engine performance.

Tailpipes

All tailpipes are made from polished T304 stainless steel and are designed to complement the styling of each model. Most tailpipes are rolled inwards to create a clean and stylish look

Fitting Kit

A fitting kit is provided with every Jetex system. With each Jetex Performance Exhaust, you can expect a minimum of a set of clamps to allow the exhaust to be fitted to the car. However, in many cases and where appropriate, stepped adaptors for the OE pipework, rubber mountings and in some cases, extra hangers are also provided. (see pictures)

Notes: 

• Fits 93 (03+) (58L Fuel Tank) [Generation 2] 1.8T/2.0T/2.8T non-Aero (Sports Saloon/Wagon/Cabriolet + Biopower)
  
• Fitting Point: Flexi-pipe
• See image gallery for info about fuel tank size. Fits to flexible pipework/catalyst. Spoiler has to be trimmed for extra tailpipes. For models with no right side tailpipe as standard, use extra hanger 63-FTH.

See our shop for more Performance Cat-Back Exhausts, Cats, De Cats, Engine Headers, Manifolds, Pipe Clamps, Weld-In Catalyst Converters plus loads more Performance Saab Parts