BMW E90 M3 Forge Motorsport Performance Rear 356mm Big Brake Kit
Brand New Genuine Forge Motorsport Performance Parts & Accessories
A Rear Big Brake kit with 4pot calipers and 356 x 28mm ventilated discs. The discs are grooved to remove braking residuals and maintain optimum performance. Included in the kit are Forge braided brakes hoses, mountings, and EBC pads. Included in the kit are Forge braided brakes hoses, mountings, and pads.
This kit is suitable for E90 series M3 variants.
The use of 19 inches or greater wheels will be required and depending on your wheel design, you may need spacers between the hub and the wheel in order to clear the calipers.
Cleaning and Maintenance of your Forge Big Brake kit
As with any aftermarket product it needs to be looked after and cared for especially on parts open to all aspects of weather. Here are a few handy steps that will help keep your Forge Brake upgrade functioning and looking like new.
- Occasionally remove your pads, then clean and grease the guide pins and sliders to stop brake dust build-up.
- Grease the back of the pad where it contacts the pistons to reduce the chances of brake pad squeal.
- Do not use any form of TFR (traffic film remover) or high concentrate alloy wheel cleaning liquids as they tend to contain acid which will eat through the paint on the calliper, and can damage the anodised pistons. Equally, TFR will remove the grease used on the sliders and guide pins, resulting in pads that stick and squeak.
We recommend all parts are fitted by a qualified mechanic to ensure the correct fitment, though this kit does include fitting instructions
See our shop for other Forge products plus 1000s more Performance Parts