BMW 316 318 E46 Jetex 2.5″ Stainless Steel Performance Cat Back Exhaust System with Twin Round 70mm Tail Pipes

£389.22 Exc Tax

Get a Lamborghini 1:64 Scale Model when you spend £50 or more.
Parts For You, Toys For The Kids
Free Gift – Lamborghini 1:64 Scale Model Toy Car with orders over £50
Never expires
Spend at least £50.00
30,000+ ⭐⭐⭐⭐⭐
SKU: 32-H3R Category: Tag:


BMW 316 318 E46 Jetex 2.5″ Stainless Steel Performance Cat-Back Exhaust System with Twin Round 70mm Tail Pipes

Genuine Brand New 100% Genuine Jetex Half System

  • Performance Stainless Steel System
  • Polished 301 Stainless Steel Twin Round 70mm Tail Pipes
  • System Pipe 2.5inch or 63.5mm

About Jetex Performance Exhausts

Jetex Performance Exhausts, Since 1986.  With 30 years of exhaust design and development experience, Jetex has gained a reputation for producing exhausts that are well-engineered, perform consistently and create a perfect harmony between car and exhaust.

Absorption Designed

Sound reduction is a critical design concern with any exhaust system. Standard exhausts use a baffle design where a series of plates slow the exhaust gases, but ultimately this leads to an increase in backpressure. Jetex silencers have no baffles. Instead, noise is reduced by absorption through a centre perforated tube. Consequently, there is less gas flow restriction and so back pressure is reduced, torque is increased and engine performance is enhanced.

Mandrel Bends

It is essential that gas flow from the engine is unrestricted and flows smoothly along the whole length of the exhaust system. All Jetex bends (where possible) are mandrel bent rather than cut and welded. This ensures that the gas exits as quickly as possible, ensuring back pressure reduction and enhanced engine performance.


All tailpipes are made from polished T304 stainless steel and are designed to complement the styling of each model. Most tailpipes are rolled inwards to create a clean and stylish look

Fitting Kit

A fitting kit is provided with every Jetex system. With each Jetex Performance Exhaust, you can expect a minimum of a set of clamps to allow the exhaust to be fitted to the car. However, in many cases and where appropriate, stepped adaptors for the OE pipework, rubber mountings and in some cases, extra hangers are also provided. (see pictures)


  • Fits BMW 316i, 318i, E46 Saloon/Touring/Coupe 98/05
  • Fits onto Catalytic Converter

See our shop for more Performance Cat-Back Exhausts, Cats, De Cats, Engine Headers, Manifolds, Pipe Clamps, Weld-In Catalyst Converters plus 1000s more Genuine Performance & OEM VW Parts


Additional information

Weight 65 lbs
Manufacturer Part Number



There are no reviews yet.

Be the first to review “BMW 316 318 E46 Jetex 2.5″ Stainless Steel Performance Cat Back Exhaust System with Twin Round 70mm Tail Pipes”

You may also like…