BMW 3 Series F30 316D Jetex Performance Exhaust System Stainless Steel Cat Back with Twin Round 80mm Quad Tail Pipes
Genuine Brand New 100% Genuine Jetex System
- Performance Stainless Steel Exhaust System
- Polished 301 Stainless Steel Twin Round 80mm Quad Tail Pipes
- System Pipe Diameter: 3 inch & 2.5 inch
About Jetex Performance Exhausts
Jetex Performance Exhausts, Since 1986. With 30 years of exhaust design and development experience, Jetex has gained a reputation for producing exhausts that are well-engineered, perform consistently and create a perfect harmony between car and exhaust.
Sound reduction is a critical design concern with any exhaust system. Standard exhausts use a baffle design where a series of plates slow the exhaust gases, but ultimately this leads to an increase in backpressure. Jetex silencers have no baffles. Instead, noise is reduced by absorption through a centre perforated tube. Consequently, there is less gas flow restriction and so back pressure is reduced, torque is increased and engine performance is enhanced.
It is essential that gas flow from the engine is unrestricted and flows smoothly along the whole length of the exhaust system. All Jetex bends (where possible) are mandrel bent rather than cut and welded. This ensures that the gas exits as quickly as possible, ensuring back pressure reduction and enhanced engine performance.
All tailpipes are made from polished T304 stainless steel and are designed to complement the styling of each model. Most tailpipes are rolled inwards to create a clean and stylish look
A fitting kit is provided with every Jetex system. With each Jetex Performance Exhaust, you can expect a minimum of a set of clamps to allow the exhaust to be fitted to the car. However, in many cases and where appropriate, stepped adaptors for the OE pipework, rubber mountings and in some cases, extra hangers are also provided. (see pictures)
- Fits BMW 3 Series F30 316D
- Fitting Point: Catalyst/Flexi-pipe
Not for models with Blue Performance/Euro 6 emission standard as exhaust replaces existing Nox catalyst. Spoiler must be trimmed or replaced for tailpipes.
See our shop for more Performance Cat-Back Exhausts, Cats, De Cats, Engine Headers, Manifolds, Pipe Clamps, Weld-In Catalyst Converters plus loads more Performance BMW Parts